View PDS1040_97048.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPICE MODEL: PDS1040
PDS1040
10A SCHOTTKY BARRIER RECTIFIER PowerDI a5 Features
* * * * * * * * * * * * * * *
Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency Low Forward Voltage Drop Very Low Leakage Current High Forward Surge Current Capability For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb)
LEFT PIN RIGHT PIN
NEW PRODUCT
D b2 L1
A A2
PowerDIa5 Dim A A2 Min 1.05 0.33 0.80 1.70 3.90 6.40 5.30 0.75 0.50 1.20 Max 1.15 0.43 0.99 1.88 4.05 6.60 5.45 0.95 0.65 1.50
E
E1
b1 b2 D
L1 e
BOTTOMSIDE b1 HEAT SINK
Mechanical Data
Case: PowerDIa5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 e3 Polarity: See Diagram Marking: See Page 3 Weight: 0.096 grams (approx.)
b1 D D2 b2
L E2 E
A2
D2 E e E1 E2 L L1 W
3.05 NOM 1.84 NOM 3.55 NOM
Note: Pins Left & Right must be electrically connected at the printed circuit board.
W
L1 e
b1
b1
All Dimensions in mm
Maximum Ratings
@ TA = 25C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (see also Figure 5) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Operating Temperature Range Storage Temperature Range Symbol VRRM VRWM VR VR(RMS) IO IFSM Tj TSTG @ TA = 25C unless otherwise specified Symbol RqJS RqJA RqJA RqJA Typ 3/4 95 75 50 Max 2.0 3/4 3/4 3/4 Unit C/W C/W Value 40 28 10 275 -65 to +150 -65 to +150 Unit V V A A C C
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point Thermal Resistance Junction to Ambient Air (Note 2) Thermal Resistance Junction to Ambient Air (Note 3) Thermal Resistance Junction to Ambient Air (Note 4)
Notes: 1. 2. 3. 4.
RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polyimide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
DS30538 Rev. 4 - 2
PowerDI is a trademark of Diodes Incorporated.
1 of 3 www.diodes.com
PDS1040
a Diodes Incorporated
Electrical Characteristics
@ TA = 25C unless otherwise specified Symbol V(BR)R VF Min 40 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Typ 3/4 0.45 0.47 3/4 0.42 0.02 5.5 0.03 6.5 Max 3/4 0.51 0.55 0.41 0.49 0.7 35 1.0 50 Unit V V Test Condition IR = 1mA IF = 8A, TS = 25C IF = 10A, TS = 25C IF = 8A, TS = 125C IF = 10A, TS = 125C TS = 25C, VR = 35V TS = 100C, VR = 35V TS = 25C, VR = 40V TS = 100C, VR = 40V
NEW PRODUCT
Characteristic Reverse Breakdown Voltage (Note 5) Forward Voltage
Reverse Leakage Current (Note 5)
IR
mA
Notes:
5. Short duration test pulse used to minimize self-heating effect.
IF, INSTANTANEOUS FORWARD CURRENT (A)
100 10
Tj = 150C
100
TJ = +25 C
10
1 0.1 0.01 0.001 0.0001 0.00001 0 100 200 300 400 500 600 700 800 900 1000 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 1 Typical Forward Characteristics
Tj = 25C Tj = -65C Tj = 125C
1
0.1
Tj = 100C Tj = 85C
0.01
TJ = -65 C
0.001
0.0001 0 10 20 30 40 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics
IR, INSTANTANEOUS REVERSE CURRENT (mA)
1000
10,000
f = 1MHz
100
Tj = 150C
Tj = 125C
10
Tj = 100C
CT, TOTAL CAPACITANCE (pF)
40
1000
1
Tj = +85C
0.1 0 10 20 30 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics
100 0 10 20 30 40 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance vs. Reverse Voltage
DS30538 Rev. 4 - 2
PowerDI is a trademark of Diodes Incorporated.
2 of 3 www.diodes.com
PDS1040
12.5
4
IPK = 1 (DC) IAV
NEW PRODUCT
IF, DC FORWARD CURRENT (A)
10.0
PF(AV), AVERAGE FORWARD POWER DISSIPATION (W)
3
7.5 Note 6
2
5.0
1
2.5
Note 2
0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (C) Fig. 5 DC Forward Current Derating 160
0 0 12 15 6 9 3 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 6 Forward Power Dissipation
TA, DERATED AMBIENT TEMPERATURE (C)
150 140 130 120 110 100 90 80 70 60 0 10 20 30
Note 2
40
VR, DC REVERSE VOLTAGE (V) Fig. 7 Operating Temperature Derating
Ordering Information
Device PDS1040-13
Notes: 2. 3. 4. 5. 6. 7.
(Note 7) Packaging PowerDIa5 Shipping 5000/Tape & Reel
FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polyimide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. Short duration test pulse used to minimize self-heating effect. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 3.0mm. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
S1040
S1040 = Product type marking code = Manufacturers' code marking YYWW = Date code marking YY = Last two digits of year ex: 04 for 2004 WW = Week code 01 to 52 K = Factory designator
YYWWK
DS30538 Rev. 4 - 2
PowerDI is a trademark of Diodes Incorporated.
3 of 3 www.diodes.com
PDS1040

▲Up To Search▲

Price & Availability of PDS1040

	To Download PDS1040 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .